|
If the photograph is clicked, it grows.
Narda STS EMR20C 3GHｚ Radiation Meters for isotropic measurement of electromagnetic fields
SOLD OUT sold |
mul426 |
| 
| 
| 
| 
| 
| 
| 
| 
|
Frequency Range:100kHz to 3GHz,
field Measured:E-Field Only,Isotropic Detection,Diode Sensor,
Measurement Range:0.6 to 800V/m,(CW signal>300kHz),
0.6 to 20V/m(True RMS),
Overload levels:700mW/cm2(CW),70W/cm2(Peak),
Absolute Error:+-1dB(27.5V/m and 27.12MHz),
Measurement Method:Digital,Triaxial measurement,
Directional characteristic:isotropic,triaxial,
Meas.range selection:one continuous range,
Display resolution:0.01V/m,0.0001A/m,0.01%,
Setting Time:typically 1s,
Display refresh rate:typically 400ms,
Display type:LCD Display,
Optical alarm:bright red LEDs in foil keypad,
Audible alarm:built-in piezoelectric generator, tone sequence depends on measured value,
Measurement function;
units:V/m,A/m,mW/cm2,W/m2,5 of limit value,
Detection:diode,rectifier,
Averaging time:4s to 15minuts,
Power supply:AA cell*2,
Operating life:>8h,
|
Manual,Cal Factor,AC Adaptor,E field Probe(type 8),
Strap,Buttery(N-600AAC,1.2V 600mAh),Carrying Case,
|
 |
|
)
)
)
)
)
)
)
)
)