Agilent 83712B /1E1,1E5,1E8 20GHz Synthesized CW Generator SOLD OUT sold
gen414
1.SINAD can be measured and the sensitivity of the receiver at low output power with option 1E1 2.High power output to drive the LO port of the mixer 3.high frequency accuracy by high-stability timebase 4.low SSB phase noise that is suitable for out-of-channel test
Frequency Range:10MHz to 20GHz, Resolution:1Hz (opt1E8), Stability:<1E-9/day after72hoursat 25degC (opt1E5), Maximum Output:+13dBm(0.01 to 1GHz),+10dBm(1GHz to 18GHz),+8dBm(18 to 20GHz), (opt1E1), Accuracy:+-2.3dB(10-50MHz),+-2.0dB(50MHz-20GHz),+-2.5dB(10MHz-20GHz), Modulations; Pulse Modulation; Maximum pulse repetition frequency: >3 MHz Minimum pulse duty cycle: no restrictions on duty cycle Pulse level accuracy: ±1.0 dB (relative to CW) Pulse overshoot: <10 % Input impedance: 50Ω nominal; TTL drive levels Maximum leveled output power in pulse mode: –0.5 dB Frequency Modulation Rates: 1 kHz to 1 MHz Flatness: ±2 dB
Noise figure meter compatibility Agilent 8370 sources are fully compatible with and can be controlled by the 8970B noise figure meter through Special Function 41.5.
Power requirements Power: 90 to 132V, 48 to 440 Hz; 198 to 264V, 48 to 66 Hz; 260 VA maximum
Physical dimensions Net weight: <16 kg (35 lb) Shipping: <23 kg (49 lb) Size: 498 mm D x 426 mm W x 133 mm H
Option 1E1: 100 dB Output Step Attenuator 1E5: High-Stability Timebase 1E8: 1 Hz Frequency Resolution
)
)
)
)
)
)
