1:It is an ideal model to test electronic equipment with a capacitor input type rectifier circuit. 2:Frequency synthesizer internal organs, 3:4 points switchable output voltage, 4:Automatic reset protection circuit 5:Low distortion rate
Frequency Range:40.00 to 500.00Hz, Step Frequency:0.01/0.1/1Hz, External Input Signal; Frequency Range:40 to 500Hz, Rated input voltage:1Vrms(Input voltage required to obtain the rated output voltage), Input Impedance:About 10kohm, Connenctor:BNC, Output; The maximum output power for electronic equipment load:620VA(However, the capacitor input type rectifier circuit of the crest factor (Ipeak/Irms)=2, Rated Output Power:500VA(Power factor>0.85), Maximum Output Power:Rated Output Power*1.1, Rated Output Voltage:100/120/200/240Vrms, Voltage variable range:Rated Volue*20 to 120%, Rated output Current:5.00Arms(100V),4.17Arms(120V),2.50Arms(200V),2.08Arms(240V), Allowable output Voltage:The output voltage is below the rated current at 100% from 20% of the rated value. Current value output voltage is given by (rated output power / output voltage) at 120% 100% of the rated value. Rated Resistance:20.0ohm(100V)/28.8ohm(120V)/80.0ohm(200V)/115ohm(240V), Top Current:2.5 times the rated value, Output voltage stability:+-100ppm/degC,+-100ppm/8h, Line Regulation:+-0.2%, Load Regulation:>+-1.0%, Distortion:>1%,
VCA Function,
Power Source:Single phase AC100V+-15% 50/60Hz, Power consumption:About 1.6kVA, Pawer Rate:>50%, Insulation and pressure:DC500V 20Mohm over, AC1500V 1minute,