If the photograph is clicked, it grows.

System dynamic range Transmission test (typical) Optical-to-optical: 38 to 51 dBo Optical-to-electrical: 105 to 110 dBe Electrical-to-optical: 75 to 95 dBe Electrical-to-electrical: 100 to 110 dBe Reflection test (typical) Optical: 31 to 44 dBo Electrical: 36 to 56 dBe Distance-time domain Length/location (typical) Range: 10 ns to 0.5 ms (2 m to 50 km) Range resolution: 0.5 ps (0.1 mm) Response resolution: 24 to 48.5 ps (5 to 10 mm) Stimulus types Low pass step: 50 ps minimum rise time Low pass impulse: 48.5 ps minimum pulse width Bandpass impulse: 97 ps minimum pulse width Group delay measurements Minimum aperture: 1 Hz Maximum 1 Hz aperture delay: 500 ms Lightwave source Wavelength: 1308 or 1550 nm, ±10 nm Spectral width: 3 nm RMS (FP) or 50 MHz (DFB) (typical) Average optical output power: 70 to 600 ?W Modulation bandwidth: 130 MHz to 20 GHz Modulation frequency resolution: 1 Hz Modulated optical output power (p-p): 90 to 130 ?W (typical) Modulation index: 25% (typical) Optical return loss: 15 dBo (typical) Lightwave receiver Wavelength: 1298 to 1560 nm Input modulation bandwidth: 130 MHz to 20 GHz Maximum average input power operating level: 5 mW System sensitivity (typical): 20 nW Input port return loss (typical): 20 dBo Microwave source Frequency bandwidth: 130 MHz to 20 GHz Frequency resolution: 1 Hz Output power range: +5 to 70 dBm Harmonics: Microwave receiver Frequency bandwidth: 130 MHz to 20 GHz Maximum input power operating level: 0 dBm System sensitivity: 110 dBm Connector types Lightwave: HMS-10 FC/PC DIN 47256 ST Biconic SC Microwave: 3.5 mm (male) Data accuracy enhancement Calibration types: Response calibration, Response and match calibration, Response and isolation calibration, 1-port calibration, Full 2-port calibration, Reference plane extensions Data averaging: IF bandwidth control, Sweep-to-sweep averaging Option 012 FC/PC Input Connector Option 100 Adds External Lightwave Source Input Option 210 1550 nm DFB Laser