If the photograph is clicked, it grows.

OS:Windows 7 Option 526 Frequency Range 26.5GHz B25 Analysis bandwidth 25MHz EP2 Enhanced Performance LO,MXA P26 Preamplifier 26.5GHz 2FP Spectrum Analyzer Measurement Application 1FP Noise Figure Measurement Application AFP Noise Figure Enhancement Frequency Range:10Hz to 26.5GHz Span Range:0Hz,10Hz to 26.5GHz Resolution:2Hz Sweep point:1 to 40001 RBW Range:1Hz to 3MHz,4,5,6,8MHz VBW Range:1Hz to 3MHz,4,5,6,8MHz and wide open Analysis Bandwidth Maximum bandwidth:25MHz Amplitude Frequency Response: 20Hz to 10 MHz ± 0.6 dB 10 MHz to 3.6 GHz ± 0.45 dB 3.5 to 8.4 GHz ± 1.5 dB 8.3 to 13.6 GHz ± 2.0 dB 13.5 to 22.0 GHz ± 2.0 dB 22.0 to 26.5 GHz ± 2.5 dB Displayed average noise level (DANL) Frequency Specification Typical 1 to 10 MHz –150 dBm –153 dBm 10 MHz to 2.1 GHz –151 dBm –154 dBm 2.1 to 3.6 GHz –149 dBm –152 dBm 3.6 to 8.4 GHz –149 dBm –153 dBm 8.4 to 13.6 GHz –148 dBm –151 dBm 13.6 to 17.1 GHz –144 dBm –147 dBm 17.1 to 22 GHz –143 dBm –146 dBm 22 to 26.5 GHz –136 dBm –142 dBm PreampOn DANL 1 to 10MHz -161 dbm -163 dbm 10 MHz to 2.1 GHz –163 dBm –166 dBm 2.1 to 3.6 GHz –162 dBm –164 dBm 3.6 to 7.0 GHz –162 dBm –166 dBm 7.0 to 13.6 GHz –162 dBm –165 dBm 13.5 to 17.1 GHz –159 dBm –163 dBm 17.0 to 20.0 GHz –157 dBm –161 dBm 20.0 to 26.5 GHz –152 dBm –157 dBm Third-order intermodulation distortion (TOI) Frequency TOI Typical 10 to 100 MHz +12 dbm +17 dbm 100 to 400 MHz +15 dBm +20 dBm 400 MHz to 3.6 GHz +16 dBm +20 dBm 3.6 to 13.6 GHz +16 dBm +19 dBm 13.6 to 26.5 GHz +15 dBm +18 dBm Phase noise Noise sidebands: (20 to 30 °C, CF = 1 GHz) Offset Specification Typical 100 Hz –91 dBc/Hz –100 dBc/Hz 1 kHz – –112 dBc/Hz 10 kHz –113 dBc/Hz –114 dBc/Hz 100 kHz –116 dBc/Hz –117 dBc/Hz 1 MHz –135 dBc/Hz –136 dBc/Hz 10 MHz – –148 dBc/Hz